Bathroom faucet maintenance tips

In the bathroom, the faucet is also very important, so we can not ignore the maintenance work of the faucet.

1. Every other month or so, wipe the faucet with car wax, you can seal the small hole on the surface of the plating layer to avoid moisture or corrosive gas running in.

2. You can use a softer cloth to apply a little bit of toothpaste to clean the surface of the faucet, then rinse it off with water. However, do not wipe with an alkaline cleaner or steel ball to avoid damage to the plating surface.

3. In the process of using the single-handle faucet, do not open and close too fast; in addition, the double-handle faucet should not be too close, otherwise the water stop bolt will fall off, causing the water to flow and the switch cannot be turned off.

4. The foaming device located at the faucet outlet often has a small amount of water or instability due to water quality problems. This may be because the foamer is blocked by debris, and the foamer can be unscrewed with water or needle to remove impurities. Object.

5. Regularly check the upper and lower water hoses, and if there is any cracking, it should be replaced immediately, so as to ensure that the service life of the faucet is not affected.

In fact, after using it for a while, we should inspect and clean the faucet to avoid the inconvenience caused by the damage.

Wenzhou Honglian Sanitary Ware Co., Ltd.

Website: www.hl-faucet.com

Email:jolin@hlfaucet.cn